Roller blinds are one of the most convenient window treatments in 2026. They are stylish, trendy blinds that fit every window. These shades are available in a range of textures and colors.
To get the perfectly fitted roller blinds, you need accurate window measurements. But the main hurdle lies in how to measure a window for roller blinds in Dubai. To address this query, this step-by-step guide is designed to help homeowners provide answers.
Tools You’ll Need
To ensure accurate window measurements, the right tools are required. Here is a list of the tools you will need for the measuring process.
Metal Tape Measure:
One key element you need is a steel tape.
Step Ladder:
It is vital to reach the top of your window to take measurements.
Paper And Pen:
Recording the accurate length and width of blinds is a necessary option.
Spirit Level:
This is used to check the frame of windows and whether they are aligned equally.
Step 1: Decide On Your Mount Type
Every window differs in shape and size, which is why it is crucial to take measurements for each window. For a standard window, the measurement process is as follows. To begin with, you need to decide on where you want to place your blackout window blinds. Either you want an inside mount or an outside placement.
Inside Mount:
Inside window mounts are placed in the window recess to perfectly fit the blinds. This mount is designed to fit into interior spaces and provide visual aspects of blinds. Also, delivers light blocking effect to residents. These methods facilitate the artistic interior and add visual depth to widows. An inside mount provides a minimalist, cleaner window appearance.
Outside Mount:
An outside mount is usually placed over the exterior window recess. When the roller blind mount is fixed to the exterior wall, it provides greater functional benefits. It completely blocks sunlight from entering your space. Along with it, conceal the uneven surfaces and wall bumps perfectly. Along with it, it offer aesthtically pleasing windows.
Step 2: Measuring For An Inside Mount
The next step is to measure the blinds accurately. Because the right measurement is crucial for blackout and motorized blinds placement. Also, an inside mount can give a minimalist, clean interior for residents. Prevent dust and harmful sunlight from entering your space.
Width (The Rule of Three)
The rule of three is the best utilized way to calculate the width of your windows. Measure the windows from top to bottom, and measure the middle as well. All the measurements are important because they provide the full dimensions of the windows. While noting down the window measurement, make sure to keep at least 5mm width from each side.
Drop (Height):
In calculating window height, all three directions must be considered. Such as middle, right, and left to get an accurate fit. From top to bottom, every inch matters when noting down the blinds’ dimensions. Prefer to keep the window depth up to 3 inches for full coverage.
Checking Depth:
To determine the depth of the window, you need to carefully measure the window frame. In this method, keep a depth of 3 inches so that your home or office blinds mount fits well on the brackets. While noting the depth, ensure there is sufficient space for roller operation without disruption. Leaving no space cause hurdle for the cranks of roller blinds and damages the handle.
Step 3: Measuring For An Outside Mount
Outside window mount is a practical solution for unattractive windows. It offers complete light blockage and prevents dirt. These mounts enhance the windows by creating a taller visual effect. Also, they are an energy-efficient option to prevent outside heat from entering the room. To determine the window dimension for outside-mount placement, follow the key steps below.
Determining The Overlap:
When taking dimensions, the question was raised: how wide should the blind be? To ensure full coverage of the roller blind, keep at least 50mm-100mm on each side. This way you can avoid overlapping and blind damages.
Width:
Take a closer measurement of your roller shades’ width. Keeping 50mm can avoid the overlapping of the horizontal sides.
Drop (Height)
To perfectly measure the height of your outside mount, take a notebook and write the vertical height. Measure from the top to the bottom to get the ideal result. Measure the window from the mounting point to the sill.
Conclusion
To conclude, the right window measurement provides an accurate fit for roller blinds. If you are new to window measurement, this guide helps you figure out the measurement process. Just like deciding on the type of roller blind mount. Then, conclude that you want an inside mount or an outside one. After that, take measurements for both inside and outside mount. For the inside mount, start noting down the width, drop, and check the depth.
Also, for an outside mount, take a look at the overlap, depth, and drop. Make sure to keep 3 inch depth for the inside mount. Keep a 50mm width to add fullness. While 50mm – 100mm should be kept from both sides of the windows. Once all the measurements are complete, start placing your blind.
